Difference between pages "File:HP 6024A.JPG" and "Drill Press 1"
|Line 1:||Line 1:|
Revision as of 17:29, 18 March 2014
- Owner/Loaner: ENTS
- Make/Model: CanWood CWD 11-150
- Usability: Works
- Contact: Raphael B.
- Where: Basement
- Certification Needed: No
- Hackable: No
- Estimated Value: $50
Motor: 120V 2.4A
Speeds: 760, 1150, 1630, 2180, 3070 RPM
Make sure to set the spindle speed to something appropriate for the size of drill bit and material you are drilling. For example, if you're using a 4" hole saw, don't use 3000 RPM. (Don't use a 4" hole saw on this drill press. It is not powerful enough. Use the Craftex in the garagae.) Ensure the belt is tensioned properly to prevent slippage.
The drive belt is severely frayed and needs immediate replacement before heavy use. If you -really- need to use this drill press, make sure the belt cover is closed. Please consider using a different drill press.
Click on a date/time to view the file as it appeared at that time.
|current||20:43, 28 January 2014||324 × 264 (15 KB)||Orcinus|
- You cannot overwrite this file.
- Edit this file using an external application (See the setup instructions for more information)