Difference between pages "EntsNetworkwishlist" and "Drill Press 1"

From ENTS
(Difference between pages)
Jump to: navigation, search
 
 
Line 1: Line 1:
* ents.ca secure email ?
+
{{Template:EquipmentPage |owner=ENTS |model=CanWood CWD 11-150 |doesitwork=Works |contact=Raphael B. |where=Basement |certification=No |hackable=No |value=$50 |itemphoto=LINK_TO_PHOTO}}<br>
* members storage (/home ?) w/ size constraints per user (ie update freenas to support NIS)
+
== Specifications ==
** possibly purchase drive enclosure and rent out drives
+
Motor: 120V 2.4A<br>
* music streaming thing
+
Speeds: 760, 1150, 1630, 2180, 3070 RPM<br>
* image NIS/NFS machine, preprovisioned hardware backups (for rapid recovery in event of failure)
+
== Equipment Settings ==
* fix issues with water, at least create channel to route water along wall rather than run all over floor, huge liability
+
Make sure to set the spindle speed to something appropriate for the size of drill bit and material you are drilling. For example, if you're using a 4" hole saw, don't use 3000 RPM. (Don't use a 4" hole saw on this drill press. It is not powerful enough. Use the Craftex in the garagae.) Ensure the belt is tensioned properly to prevent slippage.
* an accessible physical place to put machines, if bandwidth is an issue then assign a b/w limit
+
== Known Issues ==
* easier port forwarding?
+
The drive belt is severely frayed and needs immediate replacement before heavy use. If you -really- need to use this drill press, make sure the belt cover is closed. Please consider using a different drill press.
* ents terminal server/ip KVM(to reboot machines etc, access serial console, w/e)
+
* a free switch that anyone can plug a machine into and get an address (ie not requiring everything to be unlocked in the switch)(this would be nice because then could xming into own machine from upstairs machines)
+
* internet accessible cvs/svn/git
+
* encrypted secure ftp/torrent server
+
* more/bigger UPS (monitor power draw ?)
+
* an /8
+
* x-forwarding from ents to our homes (or w/e), maybe via VPN?
+
* maybe set up some kind of reverse proxy / vhost system so that people can serve http from their own machines on their own domain
+
* irc bouncer
+
* XMPP server
+
* IRC bots
+
* spy cameras
+

Revision as of 18:29, 18 March 2014

Back to list of Equipment

LINK_TO_PHOTO

Contents

Label

Drill Press 1 http://ents.ca/index.php/Drill_Press_1

General

  • Owner/Loaner: ENTS
  • Make/Model: CanWood CWD 11-150
  • Usability: Works
  • Contact: Raphael B.
  • Where: Basement
  • Certification Needed: No
  • Hackable: No
  • Estimated Value: $50

Instructions

{{{Instructions}}}

Specifications

Motor: 120V 2.4A
Speeds: 760, 1150, 1630, 2180, 3070 RPM

Equipment Settings

Make sure to set the spindle speed to something appropriate for the size of drill bit and material you are drilling. For example, if you're using a 4" hole saw, don't use 3000 RPM. (Don't use a 4" hole saw on this drill press. It is not powerful enough. Use the Craftex in the garagae.) Ensure the belt is tensioned properly to prevent slippage.

Known Issues

The drive belt is severely frayed and needs immediate replacement before heavy use. If you -really- need to use this drill press, make sure the belt cover is closed. Please consider using a different drill press.

Personal tools
Namespaces

Variants
Actions
Navigation
Members
Toolbox