Difference between pages "File:HP 6024A.JPG" and "12" Thickness Planer"
|Line 1:||Line 1:|
Latest revision as of 23:30, 28 January 2014
- Owner/Loaner: ENTS
- Make/Model: Delta TP300
- Usability: Works
- Contact: Kulps
- Where: Woodworking Bay (Garage)
- Certification Needed: No
- Hackable: No
- Estimated Value: DOLLARS
Cutting width: 12"
Material thickness: 6"
Depth of cut: 3/32"
Motor: 120v, 15a
 Equipment Settings
Do not take deeper cuts than the machine is capable of. When in doubt, take a greater number of lighter cuts.
Remember to turn on the central-vac while using this machine. It makes a LOT of mess if you don't.
 Known Problems
Blades leave minor raised portions on the wood, due to damage/notches in the blade. Slightly offsetting the blades may solve this problem.
 Future Ideas
Offset blades slightly to eliminate defects. If this does not solve the issue, flipping the blades to their second cutting edge or replacement may be necessary.
Click on a date/time to view the file as it appeared at that time.
|current||21:43, 28 January 2014||324 × 264 (15 KB)||Orcinus|
- You cannot overwrite this file.
- Edit this file using an external application (See the setup instructions for more information)