12" Thickness Planer

From ENTS
Revision as of 19:52, 28 January 2014 by Orcinus (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Back to list of Equipment

DeltaTP300.png

Contents

Label

12" Thickness Planer http://ents.ca/index.php/12%22_Thickness_Planer

General

  • Owner/Loaner: ENTS
  • Make/Model: Delta TP300
  • Usability: Works
  • Contact: Kulps
  • Where: Woodworking bay
  • Certification Needed: No
  • Hackable: No
  • Estimated Value: DOLLARS

How to Use

{{{Instructions}}}

Specifications

Cutting width: 12"
Material thickness: 6"
Depth of cut: 3/32"
Motor: 120v, 15a

Equipment Settings

Do not take deeper cuts than the machine is capable of. When in doubt, take a greater number of lighter cuts.
Remember to turn on the central-vac while using this machine. It makes a LOT of mess if you don't.

Known Problems

Blades leave minor raised portions on the wood, due to damage/notches in the blade. Slightly offsetting the blades may solve this problem.

Future Ideas

Offset blades slightly to eliminate defects. If this does not solve the issue, flipping the blades to their second cutting edge or replacement may be necessary.

Personal tools
Namespaces

Variants
Actions
Navigation
Members
Toolbox