Difference between revisions of "Drill Press 1"

From ENTS
Jump to: navigation, search
Line 4: Line 4:
 
Speeds: 760, 1150, 1630, 2180, 3070 RPM<br>
 
Speeds: 760, 1150, 1630, 2180, 3070 RPM<br>
 
== Equipment Settings ==
 
== Equipment Settings ==
Make sure to set the spindle speed to something appropriate for the size of drill bit and material you are drilling. For example, if you're using a 4" hole saw, don't use 3000 RPM. (Don't use a 4" hole saw on this drill press. It is not powerful enough. Use the Craftex in the garagae.) Ensure the belt is tensioned properly to prevent slippage.
+
Make sure to set the spindle speed to something appropriate for the size of drill bit and material you are drilling. For example, if you're using a 4" hole saw, don't use 3000 RPM. (Don't use a 4" hole saw on this drill press. It is not powerful enough. Use the Craftex in the garage.) Ensure the belt is tensioned properly to prevent slippage.
 
== Known Issues ==
 
== Known Issues ==
 
The drive belt is severely frayed and needs immediate replacement before heavy use. If you -really- need to use this drill press, make sure the belt cover is closed. Please consider using a different drill press.
 
The drive belt is severely frayed and needs immediate replacement before heavy use. If you -really- need to use this drill press, make sure the belt cover is closed. Please consider using a different drill press.

Revision as of 18:30, 18 March 2014

Back to list of Equipment

LINK_TO_PHOTO

Contents

Label

Drill Press 1 http://ents.ca/index.php/Drill_Press_1

General

  • Owner/Loaner: ENTS
  • Make/Model: CanWood CWD 11-150
  • Usability: Works
  • Contact: Raphael B.
  • Where: Basement
  • Certification Needed: No
  • Hackable: No
  • Estimated Value: $50

Instructions

{{{Instructions}}}

Specifications

Motor: 120V 2.4A
Speeds: 760, 1150, 1630, 2180, 3070 RPM

Equipment Settings

Make sure to set the spindle speed to something appropriate for the size of drill bit and material you are drilling. For example, if you're using a 4" hole saw, don't use 3000 RPM. (Don't use a 4" hole saw on this drill press. It is not powerful enough. Use the Craftex in the garage.) Ensure the belt is tensioned properly to prevent slippage.

Known Issues

The drive belt is severely frayed and needs immediate replacement before heavy use. If you -really- need to use this drill press, make sure the belt cover is closed. Please consider using a different drill press.

Personal tools
Namespaces

Variants
Actions
Navigation
Members
Toolbox