Networkwishlist

From ENTS
Revision as of 12:49, 8 January 2014 by Tim (Talk | contribs)

Jump to: navigation, search


task list


5 - log onto each machine and tell me what the ip addresses are for each interface and make a simple network map

5 - create/install rc.d script to start/stop the BIRD BGP routing daemon on the router

10 - create rc.d script to start/stop the anonet vpn connection (stopped by default), reference: [1]

10 - fix this script to send signals other than "kill -9" first, then verify that the daemon is dead, if not, send kill -9.: [2]

5 - fix my "block outgoing" tun0 firewall rules to work, ref: [3]

2 - run this script to every machine, restart, and verify ssh no longer times out: [4]

20 - fix the ugly routes hack script to properly parse routes and add them to default configs: [5]

20 - setup CARP on the routers. its already compiled into the kernel, just needs configuration.

10 - using ALTQ set up bandwidth limits on the various router interfaces to limit them to no more than 1Mbps

10 - backup a copy of /usr and /etc to some offsite location, for each machine, and send a zipped copy to my gmail

10 - install DNSmasq on the router for the chaosvpn connection and configure it to use the chaosvpn DNS for their ip range, and the DN42 ip ranges for DN42

Personal tools
Namespaces

Variants
Actions
Navigation
Members
Toolbox