Difference between pages "Mendel90 3D Printer" and "Networkwishlist"

From ENTS
(Difference between pages)
Jump to: navigation, search
 
m
 
Line 1: Line 1:
{{Template:EquipmentPage |owner=ENTS |model=Mendel90 |serial=ENTS000001 |arrived=June 2013 |doesitwork=WORKING |contact= [[User:Hov]] |where=Main Workroom |certification= YES |hackable= NO |value= $600 |itemphoto=[[File:Mendel90.jpg|350px|thumb|right|]]}}<br>
 
  
== Current State ==
 
Currently working with small issues.  Interface is at http://members.ents.ca:5000
 
  
== Who Can Certify You? ==
+
task list
[[User:Hov]]
+
---------
[[User:grelli]]
+
[[User:khawkings]]
+
  
== Specifications ==
+
5 - log onto each machine and tell me what the ip addresses are for each interface and make a simple network map
  
 +
5 - create/install rc.d script to start/stop the BIRD BGP routing daemon on the router
  
== Equipment Settings ==
+
10 - create rc.d script to start/stop the anonet vpn connection, reference: [https://wiki.hamburg.ccc.de/ChaosVPN:Tims_NetBSD_chaosvpn_rc.d]
== Modifications ==
+
The firmware has been modified to make extruder 1 (of extruders 0 and 1) behave like extruder 0. There was a magic smoke event that cooked the current limiting resistor for the extruder 0 heater.
+
  
== What Could it Use? ==
+
5 - fix my "block outgoing" tun0 firewall rules to work, ref: [https://wiki.hamburg.ccc.de/ChaosVPN:Tims_ipf_conf]
== Working on it ==
+
== Known Problems ==
+
If the hot end stops making itself hot then unplug and plug back in the connectors for the hot end on the x-carriage (the 4 pin connectors to the protoboards)
+
  
== Future Ideas ==
+
2 - run this script to every machine, restart,  and verify ssh no longer times out: [https://wiki.hamburg.ccc.de/ChaosVPN:Tims_random_router_configs]
  
== Firmware ==
+
20 - fix the ugly routes hack script to properly parse routes and add them to default configs: [https://wiki.hamburg.ccc.de/ChaosVPN:Tims_netbsd_route_hack_attempt]
 
+
[[File:Einstein-Marlin.zip]]
+

Revision as of 12:38, 8 January 2014


task list


5 - log onto each machine and tell me what the ip addresses are for each interface and make a simple network map

5 - create/install rc.d script to start/stop the BIRD BGP routing daemon on the router

10 - create rc.d script to start/stop the anonet vpn connection, reference: [1]

5 - fix my "block outgoing" tun0 firewall rules to work, ref: [2]

2 - run this script to every machine, restart, and verify ssh no longer times out: [3]

20 - fix the ugly routes hack script to properly parse routes and add them to default configs: [4]

Personal tools
Namespaces

Variants
Actions
Navigation
Members
Toolbox