Difference between revisions of "Drill Press 1"

From ENTS
Jump to: navigation, search
(Created page with "== General == * '''Owner/Loaner:''' ENTS? * '''Serial Number:''' {{{serial}}} * '''Make/Model:''' {{{model}}} * '''Arrival Date:''' {{{arrived}}} * '''Usability:''' Not Useab...")
 
m
 
(12 intermediate revisions by 2 users not shown)
Line 1: Line 1:
== General ==
+
{{Template:EquipmentPage |owner=ENTS |model=CanWood CWD 11-150 |doesitwork=Works |contact=Raphael B. |where=Basement |certification=No |hackable=No |value=$50 |itemphoto=LINK_TO_PHOTO}}<br>
* '''Owner/Loaner:''' ENTS?
+
== Specifications ==
* '''Serial Number:''' {{{serial}}}
+
Motor: 120V 2.4A<br>
* '''Make/Model:''' {{{model}}}
+
Speeds: 760, 1150, 1630, 2180, 3070 RPM<br>
* '''Arrival Date:''' {{{arrived}}}
+
Swing: 8"<br>
* '''Usability:''' Not Useable
+
Table size: 6 1/4"<br>
* '''Contact:''' {{{contact}}}
+
Quill stroke: 2"<br>
* '''Where:''' Basement
+
== Equipment Settings ==
* '''Certification Needed:''' No
+
Make sure to set the spindle speed to something appropriate for the size of drill bit and material you are drilling. For example, if you're using a 4" hole saw, don't use 3000 RPM. (Don't use a 4" hole saw on this drill press. It is not powerful enough. Use the Craftex in the garage.) Ensure the belt is tensioned properly to prevent slippage.
* '''Hackable:''' No
+
== Known Issues ==
* '''Estimated Value:''' {{{value}}}
+
The drive belt is severely frayed and needs immediate replacement before heavy use. If you -really- need to use this drill press, make sure the belt cover is closed. Please consider using a different drill press. We have four.

Latest revision as of 19:44, 18 March 2014

Back to list of Equipment

LINK_TO_PHOTO

Contents

[edit] Label

Drill Press 1 http://ents.ca/index.php/Drill_Press_1

[edit] General

  • Owner/Loaner: ENTS
  • Make/Model: CanWood CWD 11-150
  • Usability: Works
  • Contact: Raphael B.
  • Where: Basement
  • Certification Needed: No
  • Hackable: No
  • Estimated Value: $50

[edit] Instructions

{{{Instructions}}}

[edit] Specifications

Motor: 120V 2.4A
Speeds: 760, 1150, 1630, 2180, 3070 RPM
Swing: 8"
Table size: 6 1/4"
Quill stroke: 2"

[edit] Equipment Settings

Make sure to set the spindle speed to something appropriate for the size of drill bit and material you are drilling. For example, if you're using a 4" hole saw, don't use 3000 RPM. (Don't use a 4" hole saw on this drill press. It is not powerful enough. Use the Craftex in the garage.) Ensure the belt is tensioned properly to prevent slippage.

[edit] Known Issues

The drive belt is severely frayed and needs immediate replacement before heavy use. If you -really- need to use this drill press, make sure the belt cover is closed. Please consider using a different drill press. We have four.

Personal tools
Namespaces

Variants
Actions
Navigation
Members
Toolbox